GCMS analysis of triterpenoid resins: In situ derivatization procedures using quaternary ammonium hydroxides = L'analyse CG-SM des résines triterpénoïdes : les méthodes de dérivatisation in situ utilisant les hydroxydes d'ammonium quaternairesWATTS, Siobhan; DE LA RIE, E. René.Studies in conservation. 2002, Vol 47, Num 4, pp 257-272, issn 0039-3630, 16 p.Article

Effect of tetramethyl ammonium hydroxide on rheological properties of aqueous zirconia suspensions with polyacrylateXIAOLI WANG; LUCUN GUO.Colloids and surfaces. A, Physicochemical and engineering aspects. 2008, Vol 324, Num 1-3, pp 126-130, issn 0927-7757, 5 p.Article

Adsorption of CH₄ and CO₂ on Zr-metal organic frameworksHUSSEIN RASOOL ABID; GIA HUNG PHAM; ANG, Ha-Ming et al.Journal of colloid and interface science. 2012, Vol 366, pp 120-124, issn 0021-9797, 5 p.Article

Low-liquid pretreatment of corn stover with aqueous ammoniaXUAN LI; TAE HYUN KIM.Bioresource technology. 2011, Vol 102, Num 7, pp 4779-4786, issn 0960-8524, 8 p.Article

Comparison of etch characteristics of KOH, TMAH and EDP for bulk micromachining of silicon (110)SHANKAR DUTTA; MD IMRAN; KUMAR, P et al.Microsystem technologies. 2011, Vol 17, Num 10-11, pp 1621-1628, issn 0946-7076, 8 p.Article

Crystallization of faujasite Y from seeds dispersed on mesoporous materialsPEREZ-ROMO, Patricia; ARMENDARIZ-HERRERA, Héctor; VALENTE, Jaime S et al.Microporous and mesoporous materials. 2010, Vol 132, Num 3, pp 363-374, issn 1387-1811, 12 p.Article

Influence of Etching Potential on Convex Corner Anisotropic Etching in TMAH SolutionBAGOLINI, Alvise; FAES, Alessandro; DECARLI, Massimiliano et al.Journal of microelectromechanical systems. 2010, Vol 19, Num 5, pp 1254-1259, issn 1057-7157, 6 p.Article

Study of surfactant-added TMAH for applications in DRIE and wet etching-based micromachiningTANG, B; SHIKIDA, M; SATO, K et al.Journal of micromechanics and microengineering (Print). 2010, Vol 20, Num 6, issn 0960-1317, 065008.1-065008.9Article

Optimization of process parameters for electrochemical nitrate removal using Box-Behnken designMIAO LI; CHUANPING FENG; ZHENYA ZHANG et al.Electrochimica acta. 2010, Vol 56, Num 1, pp 265-270, issn 0013-4686, 6 p.Article

PEG-directed hydrothermal synthesis of multilayered alumina microfibers with mesoporous structuresZHENFENG ZHU; HUI LIU; HONGJUN SUN et al.Microporous and mesoporous materials. 2009, Vol 123, Num 1-3, pp 39-44, issn 1387-1811, 6 p.Article

One-Pot Synthesis and Characterization of Three Kinds of Thiol-Organosilica NanoparticlesNAKAMURA, Michihiro; ISHIMURA, Kazunori.Langmuir. 2008, Vol 24, Num 9, pp 5099-5108, issn 0743-7463, 10 p.Article

A Novel Catechol-Based Universal Support for Oligonucleotide SynthesisANDERSON, Keith M; JAQUINOD, Laurent; JENSEN, Michael A et al.Journal of organic chemistry. 2007, Vol 72, Num 26, pp 9875-9880, issn 0022-3263, 6 p.Article

Facile synthesis of zeolitic imidazolate framework-8 from a concentrated aqueous solutionMING HE; JIANFENG YAO; QI LIU et al.Microporous and mesoporous materials. 2014, Vol 184, pp 55-60, issn 1387-1811, 6 p.Article

Reduced pretreatment severity and enzyme loading enabled through switchgrass pelletingNAHAR, Nurun; PRYOR, Scott W.Biomass & bioenergy. 2014, Vol 67, pp 46-52, issn 0961-9534, 7 p.Article

Effects of surface chemical properties of activated carbon modified by amino-fluorination for electric double-layer capacitorJUNG, Min-Jung; JEONG, Euigyung; CHO, Seho et al.Journal of colloid and interface science. 2012, Vol 381, pp 152-157, issn 0021-9797, 6 p.Article

Etched profile control in anisotropic etching of silicon by TMAH+TritonPAL, Prem; GOSALVEZ, M. A; SATO, K et al.Journal of micromechanics and microengineering (Print). 2012, Vol 22, Num 6, issn 0960-1317, 065013.1-065013.9Article

Effect of alkaline pre-treatment on enzyme synergy for efficient hemicellulose hydrolysis in sugarcane bagasseBEUKES, Natasha; PLETSCHKE, Brett I.Bioresource technology. 2011, Vol 102, Num 8, pp 5207-5213, issn 0960-8524, 7 p.Article

Hydrothermal synthesis of MWW-type analogues using linear-type quaternary alkylammonium hydroxides as structure-directing agentsCHAOCHAO YUE; WEI XIE; YUEMING LIU et al.Microporous and mesoporous materials. 2011, Vol 142, Num 1, pp 347-353, issn 1387-1811, 7 p.Article

Preparations of Polystyrene/Aluminum Hydroxide and Polystyrene/ Alumina Composite Particles in an Ionic LiquidKINOSHITA, Keigo; MINAMI, Hideto; TARUTANI, Yasunori et al.Langmuir. 2011, Vol 27, Num 8, pp 4474-4480, issn 0743-7463, 7 p.Article

Experimental procurement of the complete 3D etch rate distribution of Si in anisotropic etchants based on vertically micromachined wagon wheel samplesGOSALVEZ, M. A; PAL, Prem; FERRANDO, N et al.Journal of micromechanics and microengineering (Print). 2011, Vol 21, Num 12, issn 0960-1317, 125007.1-125007.14Article

Room temperature synthesis of titanium dioxide nanoparticles of different phases in water in oil microemulsionKESWANI, Rahul K; GHODKE, Harshad; SARKAR, Deepa et al.Colloids and surfaces. A, Physicochemical and engineering aspects. 2010, Vol 369, Num 1-3, pp 75-81, issn 0927-7757, 7 p.Article

Complex three-dimensional structures in Si{100} using wet bulk micromachiningPAL, Prem; SATO, Kazuo.Journal of micromechanics and microengineering (Print). 2009, Vol 19, Num 10, issn 0960-1317, 105008.11-105008.9Article

Cross-axis sensitivity reduction of a silicon MEMS piezoresistive accelerometerRAVI SANKAR, A; DAS, S; LAHIRI, S. K et al.Microsystem technologies. 2009, Vol 15, Num 4, pp 511-518, issn 0946-7076, 8 p.Article

Ultralow density silica aerogels prepared with PEDSXU CHAO; SHEN JUN; ZHOU BIN et al.Journal of non-crystalline solids. 2009, Vol 355, Num 8, pp 492-495, issn 0022-3093, 4 p.Article

Improvement in optical transmission of the ambient pressure dried hydrophobic nanostructured silica aerogels with mixed silylating agentsPARVATHY RAO, A; RAO, A. V.Journal of non-crystalline solids. 2009, Vol 355, Num 45-47, pp 2260-2271, issn 0022-3093, 12 p.Article